Engine Codes

[DandSPro]

Hey Everyone,
Got back from the trip and I notice my engine light came on. So I pulled the codes to see what they were.

P O 118
P O 401

Thanks,
Dave

[Swanee]

Hey Everyone,
Got back from the trip and I notice my engine light came on. So I pulled the codes to see what they were.

P O 118
P O 401

Thanks,
Dave

P0118 Engine Coolant Temperature Circuit High Input. Checks ECT for a temp. lower than a specified oil temp. expected for normal operation when ECT voltage is greater than 4.78 volts. Default 180 degrees F/82 degrees C-no fast idle.

P0401 Exhaust Gas Recirculation Flow Insufficient Detected. EGR valve position does not match desired limitsbased on engine speed/load.

[DandSPro]

Swanee,
I guess I should bring it in to get it looked at.
On the last trip towing about 10,000 lbs. I had a hard time keeping the coolant from puking all over the place running I-40 to DFW.


Dave

[Swanee]

I read somewhere that there's a new cap and a TSB to deal with the puking issue, although I don't know the particulars.

[Tom]

Swanee,
I guess I should bring it in to get it looked at.
On the last trip towing about 10,000 lbs. I had a hard time keeping the coolant from puking all over the place running I-40 to DFW.


Dave

Read this.
http://forums.thedieselstop.com/ubbthrea...=31&fpart=1

Might shed some light on the issue.

-T

[DandSPro]

Tom,
Give me a call.You must have changed your numbers.
Been trying to get a hold of you.

Dave

[Tom]

gotcha.
Calling.....
-T