I am looking at replacing the glow-plus in my '03 6.0L to solve a hard starting problem and was wondering if anyone had done this and /or there are any instructions/tips out there for me to use. I have searched around a bit but have found nothing too usefull other that a tool needed to pull the plugwires off the glow-plugs as to not break them. Any and all help is welcome... Thanks...
My rig:
2003 F350 CC, AT, Lariat LB, Dually , '03 turbo with loud whistle , K and N Intake filter kit, AFE 4inch turbo back with CAT delete and flow through muffler, 4 to 5 inch chrome tip slant cut, Hypertech performance chip, Quadzilla digital monitor, Stock Fuel Tanks. White Ext with gold stripe , beige leather Int , Alcoa 19.5 Rims Factory Center Caps , push bar with four 55watt lights, 5th.Wheel hitch 16k, soft foldable bed cover, upgrades stereo with Sirius and Aux in.
My trailer
2005 Thor 36ft. fifth wheel toy hauler... four chrome wheels and pushing about 15k weight loaded.
Go get the latest flash from the Ford dealer...
Adam
02 F250 cc/sb 7.3L 2wd
02 F350 sc/lb 7.3L 4wd
I dont knwo if it goes the same for the 6.0 as it did for my 7.3 but you need to replace the whole harness just as a precatuion ..i guess i did it i just replaced one bank .. And i havent had a prblem yet and that was 2 years ago .. So .. Just find wich banks its form adn do one side its kinda a pain ..
TEXAS REDNECKS " You gotta have NUTS to follow our RUTS "
7.3 juice with additude , TNBB turbo , 5 in EXT , 6in lift , f650 dash mod , zoodad mod , 08 tail gate , 07 HD lights ,07 GRILL
wish list: john wood tranny, fuel system , injectors
Did you do the uvc harness? and do you remember how much it ran? Thanks KArl
RIP Muley 9-25-09
You're ridin with the best now!
1996 F-350 psd drw,crew cab, declawed, demuffed,fumotoed, a post triple pillar gauges,edge evo, home-made intake, line-x (10-17-05) On-board air with loud horns. IDM MOD by matty, SOCAPS member (6-11-07) (8-21-06)coolant eye (12/28/07) Stancor gpr (12/26/07), Coolent filter (11-1-2008) Trani by JOHN WOOD, Relocated Block heater plug (1/1/2011) . more mods to come
ses light on? hard start on a 6.0l can be a number of things. In ca. you can have half the glow plugs out and it will start.scan the computer and see if you have any stored codes before you spend any money.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks