PDA

View Full Version : Hypermax is in!!!!



TurboYT
06-29-2004, 10:05 AM
The new Hypermax turbo is in and sounding great. I'll have to get back to you all when I get the pyrometer and boost gauge up and running. Then I'd like to talk numbers.

Godzilla Jr
06-29-2004, 10:34 AM
Definitely get the guages! With the turbo you'll be surprised at how high (and fast) the numbers will get. Heat is a killer for these engines.

TurboYT
06-29-2004, 10:47 AM
Your's was factory turbo, right? And then you added the ATS 3" housing? Where are you taking your temp. readings from? Pre or post turbo? The hypermax is set up to have the temp. taken pre-turbo, so my numbers are hotter than most. I think the psd's are post turbo but not 100% sure.

Godzilla Jr
06-29-2004, 11:37 AM
Factory Turbo and added ATS 3"housing & outlet. Pyro is pre-turbo. With my IP maxed out I can hit 1250 easy http://www.socaps.comimages/graemlins/blush.gif http://www.socaps.comimages/graemlins/blush.gif

weweld
06-29-2004, 09:40 PM
With all the air the H2 pushes it will help keep those temps down http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/yay.gif

When towing 14k I can go 0 to 70 flat out and never get above 1250 http://www.socaps.comimages/graemlins/bigshock.gif http://www.socaps.comimages/graemlins/bigshock.gif

http://www.socaps.comimages/graemlins/chef.gifGENE http://www.socaps.comimages/graemlins/burnout.gif http://www.socaps.comimages/graemlins/usa.gif http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/hungry.gif http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/flatware.gif http://www.socaps.comimages/graemlins/yay.gif

TurboYT
06-30-2004, 09:36 AM
The pyro will be fully opperational today, so I'll be able to start the fine tuning, and turning up the pump more. We did 2 turns right off the bat, and I think I'll need more once I can see what's going on.

At 2 turns I don't see even a hint of black smoke through the rpm cycle.

TurboYT
07-01-2004, 11:42 PM
A lot more room to play with. I am already seeing good power gains and am only producing 6 lbs of boost @ about 500 to 550 degrees.

F350BIGBEAR
07-05-2004, 01:53 PM
Keep tuning till you get to 10-11 psi at full foot to floor throttle.that should get you 1000-1100 on your pyro.and you will be safe. http://www.socaps.comimages/graemlins/laugh.gif

TurboYT
07-05-2004, 09:08 PM
Thank you. I will be fine tuning after the paint and body work are complete

beretzs
07-28-2004, 06:22 AM
TurboYT, how is the turbo tuning coming along? I am dieing to get home and give a good crank on the pump. I have been thinking it over alot and I get really no smoke, so I am going to remedy that, I think a solid turn on the IP will give me a little help. Scotty

TurboYT
07-29-2004, 10:16 AM
Unfortunately I have not had a chance to play with it. Truck is still getting it's make over. Will have it tomorrow, so "they" say.

weweld
07-29-2004, 09:39 PM
Lets play with it up north http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/yay.gif

http://www.socaps.comimages/graemlins/chef.gifGENE http://www.socaps.comimages/graemlins/burnout.gif http://www.socaps.comimages/graemlins/usa.gif http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/hungry.gif http://www.socaps.comimages/graemlins/yay.gif http://www.socaps.comimages/graemlins/flatware.gif http://www.socaps.comimages/graemlins/yay.gif

TurboYT
07-30-2004, 02:52 PM
Would love to, when is the next "Northern" rendevous?

Just in - Old 71 won't be done til Monday! http://www.socaps.comimages/graemlins/confused.gif